Measuring For A Window With A Sill

Measuring Outside Mount For A Window With A Sill

Your height measurement should start at the top of the window sill. If your window has an architrave, be sure to measure from the edges of the architrave.

  • Measure the height of your window - bottom to top - in three different places;
  • Measure the width of your window - left to right - in three different places;
  • Compare your measurements and select the largest of the three.

 

Outside with sill

 

Measuring Outside Mount For A Window With A Sill And Architrave

When measuring outside mount for a window with a sill and architrave, your height measurement should begin at the top of the window sill and end at the edge of the architrave.

  • Measure the height of your window -bottom to top - in three different places;
  • Measure the width of your window - left to right - in three different places;
  • Compare your measurements and select the largest of the three.

 

Outside architrave with sill

 

Measuring Inside Mount For A Window With A Sill

  • Measure the height – bottom to top – of your window in three different places. Start from the top of your sill and end on the inside of your recess.
  • Measure the width of your window – left to right – in three different places;
  • Compare your measurements and select the smallest of the three.

 

Inside the recess with sill

 

Measuring Inside Mount For A Window With A Sill + Architrave

  • Measure the height - bottom to top - of your window in three different places. Start from the top of your sill and end on the inside of your recess.
  • Measure the width of your window, inside the recess - left to right - in three different places;
  • Compare your measurements and select the smallest of the three.

 

Recess architrave and sill

 

Windows are rarely perfect square and there will be some variation in your measurements. Do not take any deductions, we will figure this out for your during the manufacturing process.

 

0 2

Was this article helpful?

Gil Baker
By: Gil Baker Published: 12 Feb 2018